Free Shipping Over $50*

Daiwa Seaborg 1200MJ

043178125281

11

Product Details

Mega Torque Motor- The strength of Seaborg’s new custom motor is in the same class as the mighty Marine Power 3000. The power and speed is quiet and smooth, and with an output of approximately 1.3 times greater than previous motors. This is the ultimate battle machine. With all this power, the new aluminum composite housing is designed to maximize the release of heat and keep the motor cool, ensuing that the power is available all the time. This monster has a tough heart inside, to challenge any fierce battle in the sea.

Megatwin- Daiwa’s original Seaborg Megatwin reel design utilizes a two-gear ratio system. The new Seaborg employs a totally redesigned system that allows the user to immediately switch between mega-power mode and mega-speed mode by simply touching a button. During retrieve or when battling a monster, the new speed function switches smoothly and effortlessly. With this functionality, an angler can alternate to the best speed, depending on the situation.

ATD (Automatic Drag System)- ATD drag system that gives you the power and poise to take control of whatever crosses your angling path. ATD is a combination of seven large carbon washers and improved drag grease. The new grease exhibits a low viscosity at rest yet becomes more viscous immediately after drag start up. This reduces initial drag start-up inertia. When combined with the structural changes to the ATD Drag washers, results in a smoother stronger drag from the initial hook up, allowing you to concentrate on the fight. This tough drag function will adjust according to the pulling of the fish. Seaborg 1200 to keep the drag smooth under extreme pressure, an aluminum drag radiator is located on the handle shaft that dissipates heat away from the drag system, maximizing the release of heat, keeping the drag cooler for better drag performance. This ultimate function will maintain the drag power to help conquer large fish. Also, an alarm sound function will notify anglers when line is being pulled out.

Features

• Powerful Megatwin (switchable between high/low gear
• English version LCD
• Magsealed ball Bearing
• Oversize SIC line guide
• Jog Power Lever
• Drag radiator
• Convenient 12-Volt DC Operation (acceptable range of voltage 12-16.8V)
• Electric current usage No load – 4 amps, Rated 7/5A (Hi/Lo) amps, Maximum • power – 20 amps
• Line Counter and Depth Memory
• LCD Readout

    Mono Cap. (lb/yds) Braid Cap. (lb/yds)
    Bearings
    Max Drag Full
    Max Drag Strike
    Gear Ratio High/Low
    Line Retrieve High/Low
    Weight (oz)
    30/850
    40/600
    50/1100
    65/900
    1MBB 21BB 72.8lbs
    na 2.9:1 24.8"
    70.5
    Select from standard spooling options listed in the drop-down menu above, or let us know how you would like your reel spooled. Custom spooling including top-shots, wind-ons, hollow-core backing, and fluorocarbon are available. Call or send a note with your requirements and we'll advise costs. All reels are machine spooled under ideal tension, braid is spooled with approximately 50 feet of mono backing. Wind-on leaders are offered for both hollow core and non-hollow braid, hollow core is spliced and non-hollow braid is connected loop-to-loop with a bimni twist.


    DESCRIPTION
    Product Details

    Mega Torque Motor- The strength of Seaborg’s new custom motor is in the same class as the mighty Marine Power 3000. The power and speed is quiet and smooth, and with an output of approximately 1.3 times greater than previous motors. This is the ultimate battle machine. With all this power, the new aluminum composite housing is designed to maximize the release of heat and keep the motor cool, ensuing that the power is available all the time. This monster has a tough heart inside, to challenge any fierce battle in the sea.

    Megatwin- Daiwa’s original Seaborg Megatwin reel design utilizes a two-gear ratio system. The new Seaborg employs a totally redesigned system that allows the user to immediately switch between mega-power mode and mega-speed mode by simply touching a button. During retrieve or when battling a monster, the new speed function switches smoothly and effortlessly. With this functionality, an angler can alternate to the best speed, depending on the situation.

    ATD (Automatic Drag System)- ATD drag system that gives you the power and poise to take control of whatever crosses your angling path. ATD is a combination of seven large carbon washers and improved drag grease. The new grease exhibits a low viscosity at rest yet becomes more viscous immediately after drag start up. This reduces initial drag start-up inertia. When combined with the structural changes to the ATD Drag washers, results in a smoother stronger drag from the initial hook up, allowing you to concentrate on the fight. This tough drag function will adjust according to the pulling of the fish. Seaborg 1200 to keep the drag smooth under extreme pressure, an aluminum drag radiator is located on the handle shaft that dissipates heat away from the drag system, maximizing the release of heat, keeping the drag cooler for better drag performance. This ultimate function will maintain the drag power to help conquer large fish. Also, an alarm sound function will notify anglers when line is being pulled out.

    Features

    • Powerful Megatwin (switchable between high/low gear
    • English version LCD
    • Magsealed ball Bearing
    • Oversize SIC line guide
    • Jog Power Lever
    • Drag radiator
    • Convenient 12-Volt DC Operation (acceptable range of voltage 12-16.8V)
    • Electric current usage No load – 4 amps, Rated 7/5A (Hi/Lo) amps, Maximum • power – 20 amps
    • Line Counter and Depth Memory
    • LCD Readout

      SPECIFICATIONS
      Mono Cap. (lb/yds) Braid Cap. (lb/yds)
      Bearings
      Max Drag Full
      Max Drag Strike
      Gear Ratio High/Low
      Line Retrieve High/Low
      Weight (oz)
      30/850
      40/600
      50/1100
      65/900
      1MBB 21BB 72.8lbs
      na 2.9:1 24.8"
      70.5
      SPOOLING OPTIONS
      Select from standard spooling options listed in the drop-down menu above, or let us know how you would like your reel spooled. Custom spooling including top-shots, wind-ons, hollow-core backing, and fluorocarbon are available. Call or send a note with your requirements and we'll advise costs. All reels are machine spooled under ideal tension, braid is spooled with approximately 50 feet of mono backing. Wind-on leaders are offered for both hollow core and non-hollow braid, hollow core is spliced and non-hollow braid is connected loop-to-loop with a bimni twist.


      Search

      --> -->